TREO Staffing is looking for a Non-Licensed Electrician for residential homes. Key duties include: Install conduits, wiring, electrical panels and circuitsStart...

A Press/Shear Operator is responsible for the safe operation of metal fabrication equipment used for bending/cutting materials to detailed specifications used in...

MachinistOperates and maintains lathe and milling machines.Reviews drawings, instructions, blueprints or samples to ensure accurate production.Takes precise measurements...

 Must have at least 8 months’ of experience fabricating and installing exhaust blanket within a marine and/or industrial setting (marine experience is...

An Electronic Technician lay’s out, builds, tests installs, troubleshoots, repairs and modifies electrical and electronic components, parts, equipment and...

A System Tester provides hands-on assistance to his assigned supervisor.  Such assistance includes any and all duties required in the performance of the test...

Outside Machinist. Installs, aligns, and repairs ship machinery such as propelling machinery, auxiliary motors, pumps, ventilating equipment, steering gear, laundry...

Responsible for the installation, test and repair of marine cables and equipment. Installation and connection of lighting, electrical power, electronics and...

A Pipe Welder prepares and welds pipe and fittings for various material types as specified by construction drawings and technical guidance documents. Must have a...

Verify conformance of workpieces to specifications, using squares, rulers, and measuring tapes. Align and fit parts according to specifications, using jacks,...

Fluxcore and MIG hard wire Welding Weld Components in flat, vertical, or overhead positions. Lay out, position, align, and secure parts and assemblies prior...

- Must have a minimum of 6 months of Aluminum (GMAW-P) welding experience - Must successfully demonstrate the ability to pass a hands-on 3G/4G aluminum (GMAW-P)...

HIRING NOW EXPERIENCE PREFERRED: * PREVIOUS EXPERIENCE IN A FABRICATION SHOP SETTING * MUST BE PROFICIENT IN READING BLUEPRINTS (TEST WILL BE...

Motor rewinders install, remove and insulate coils in electric motors. They use several hand and power tools to troubleshoot motors and reassemble them to customer...

MachinistOperates and maintains lathe and milling machines.Reviews drawings, instructions, blueprints or samples to ensure accurate production.Takes precise measurements...

 Locates and moves materials and parts from warehouse to storage areas and between work areas of the facility. Responsibilities also include, but are not limited...

You must be able to set up welding machines and equipment (both MIG and TIG); read and interpret blueprints to understand the product's specifications; weld, cut,...

- Must have a minimum of 6 months of Aluminum (GMAW-P) welding experience - Must successfully demonstrate the ability to pass a hands-on 3G/4G aluminum (GMAW-P)...

Qualified Candidates will use torches and tools to cut and shape metal pieces. (Band Saw) Must know how to  measure all metal pieces to ensure they conform...

TREO Staffing is looking for a Non-Licensed Electrician for residential homes. Key duties include: Install conduits, wiring, electrical panels and circuitsStart...

General:If you are primarily a stick or flux core welder, do not apply, you will be rejected.Candidate must be proficient at MIG and TIG welding and pass an in house...

* Verify vertical and horizontal alignment of structural steel members, * Use of plumb bobs, laser equipment, transits, or levels. * Cut, bend, or weld steel...

A Numerical Control Operator is responsible for the safe operation of metal fabrication equipment used for bending/cutting materials to detailed specifications used...

* Verify vertical and horizontal alignment of structural steel members, * Use of plumb bobs, laser equipment, transits, or levels. * Cut, bend, or weld steel...

* Verify vertical and horizontal alignment of structural steel members, * Use of plumb bobs, laser equipment, transits, or levels. * Cut, bend, or weld steel...

The requirements for the position are as follows: • Must have a minimum of 2 (two) years of experience operating:  Manitowoc 200 Ton Friction Crane •...

Ship Fitter Job Description: Layout, fit-up and fabrication of steel plate and beam.Use of trade specific tools such as: hand torch, hydraulic and ratchet jacks,...

GENERAL FUNCTION: The painter is responsible for painting components, equipment, interiors and exteriors of vessels using spray guns, brushes and rollers. Uses solvents...

Perform installation and maintenance of heating and air conditioning systemsRepair, maintain, and calibrate systemsTasks may include installation, repair, adjusting,...

Painter/Blaster is responsible for the preparation of metal surfaces for painting and will also paint components, equipment, interiors, and exteriors of vessels....

The 1st Class Crane Operator is responsible for the safe operation of a crawler crane friction and hydraulic, cherry picker, forklift, barge cranes, gantry crane...

A 1st class Rigger assembles rigging to lift and move equipment or material, selects cables, spreader bars, plate clamps, and shackles according to weight and...

The Ideal Scaffold Carpenter will need to be able to dismantles wooden structures, such as concrete forms, scaffolds, tunnel and sewer supports, and temporary frame...

A Shipfitter Working Leaderman is responsible for directing his/her workforce in the successful fitting of all structural components of assigned vessels.  The...

Outside Machinist. Installs, aligns, and repairs ship machinery such as propelling machinery, auxiliary motors, pumps, ventilating equipment, steering gear, laundry...

1) Welds together metal components of products, such as  ships and barges as specified by layout, blueprints, diagram, work order, welding procedures, or oral...

Verify conformance of workpieces to specifications, using squares, rulers, and measuring tapes. Align and fit parts according to specifications, using jacks,...

A Maintenance Electrician installs and repairs wiring, fixtures, and equipment for all electrical services for the facility. Ideal candidate should have a minimum...

A Pipe Fitter performs layout, fabrication, installation, testing, and repair of pipe systems. The requirements for the position are as follows: • Must have...

* Verify vertical and horizontal alignment of structural steel members, * Use of plumb bobs, laser equipment, transits, or levels. * Cut, bend, or weld steel...

We are currently hiring Mig and Fluxcore welders for a fabrication yard in St. Bernard. Hours are Sunday - Thursday 11:00 pm - 8:00 am. This is a long term permanent...

Test and inspect hydraulic pumps, valves and cylinders, etc. Troubleshoot mobile and industrial equipment and systems. Conducts field service calls for various...

The ideal candidate must have 5 years of supervisory in addition to electrical OR piping experience performing installations, hook ups, tests, and trouble-shooting...

A Material Handler locates and moves materials and parts from storage areas into shops and designated work areas for production in addition to assisting in maintaining...

A Numerical Control Operator is responsible for the safe operation of metal fabrication equipment used for bending/cutting materials to detailed specifications used...

A Maintenance Electrician installs and repairs wiring, fixtures, and equipment for all electrical services for the facility. Ideal candidate should have a minimum...

A FCAW 3G/4G Structural Welder welds together structural metal components as specified by blueprints, work orders, or oral instructions. The requirements for the...

A Shipfitter Working Leaderman is responsible for directing his/her workforce in the successful fitting of all structural components of assigned vessels.  The...

A  Pipe Working Leaderman is responsible for directing his/her workforce in the successful fitting and welding of all piping components of assigned vessels. ...

A Pipe Fitter performs layout, fabrication, installation, testing, and repair of pipe systems. The requirements for the position are as follows: • Must have...